KEYENCE BL-700 Series - Manual (Page 10)

Using the Manual
* This manual uses the expression “BL-700” for the BL-700/701/740/741/780/781
unless otherwise specified.
Purpose Reference page
Turn on the trigger timing or wire the RS-232C cable. P.6 to 24
Mount the bar code reader. P.25 to 29
Perform the simple read test. P.40
Check the test mode reading rate or readout count on the P.81
PC screen.
Change the BL-700 settings using the setup software. P.51 –
Change the BL-700 settings through the handheld programmer See the BL-P2E
BL-P2E. User’s Manual.
Communicate with a PC. P.105 –
Control the BL-700 with the PLC link. P.121 –
Use the BL-700 with the multi-drop link. See the N-400
User’s Manual.
Troubleshooting P.136
PLC link communication setup. P.118
Notice
• No part of this instruction manual may be reprinted or reproduced without the
prior written permission of KEYENCE CORPORATION.
• KEYENCE assumes no responsibility for the contents of this manual. No liability
is assumed for damages resulting from a program created by customers.
• The contents of this manual are subject to change without notice.
• “MS”, “Windows” and “Windows95” are registered trademarks of Microsoft,
U.S.A.
• Other company names and product names are registered or nonregistered
trademarks of respective companies.
ix