KEYENCE BL-700 Series - Manual (Page 70)

Chapter 4 Installing the Setup Software
56
4
4.3 Details of Setup
4.3.1 Setup procedure
Main (Operation setting)
Set read mode, additional data function and trigger input.
1. When “Single” is selected in “Read Mode”, the following appears:
When “Multi 1” or “Multi 2” is selected, the following appears:
Set the data to a number from 1 to 255 (100 ms to 25.5 s).
When “Multi 3” is selected, these setting menus will not appear.
2. Multiple data can be selected in “Additional data function”. “Scan count” ap-
pears only when “Decode count” is selected.