KEYENCE BL-700 Series - Manual (Page 84)

Chapter 4 Installing the Setup Software
70
4
Saving updated settings in a file
1. To save updated settings in a file, click on [Save]. The following screen will
appear.
2. Click on the file name entry field, and enter a file name using the keyboard.
Specify a file name within eight characters. Be sure to add the extension “NCF”.
After entering the file name, click on [OK] to save the file.
Note: This software cannot accept a long file name in Windows 95.
When the saved setting file is sent to the BL-700, the name of the file is simultaneously
sent to the BL-700. When you read the settings of the BL-700 using this software, the file
name is also read. It is convenient for maintenance since you can find the file that stores
the settings.
To enter a file name, use alphanumerics (letters and numbers) only. Otherwise, the file
name cannot be sent to the BL-700, because it can only recognize alphanumerics. To send
a file name, be sure to enter the file name using alphanumerics and then save it. (If the file
name is not saved, it cannot be sent to the BL-700.)
Tips