KEYENCE BL-700 Series - Manual (Page 65)

51
Chapter 4 Installing the Setup Software
4
3. Run the “SETUP” file from the floppy disk drive.
(This step is common to both the Windows 3.1 and Windows 95.)
Type in as follows:
A: \SETUP
4. The BL-700 setup software installer starts. Follow the instructions in the install
window. (Typically, the installation procedure can be completed simply by
pressing [Next (N)] twice.)
5. The setup software is normally installed in the following directory:
C: \KEYENCE\BLSET
If this directory is correct, click on [Next (N)]. If you wish to change the directory,
click on [Browse (R)..], and select the desired directory.
6. When installation starts, the file copy process is displayed as a graph. When the
installation is completed, the following message appears.
7. For Windows 3.1, double-click on the [BL] icon in the [KEYENCE] group to start
the setup software.
For Windows 95, start the program from the "Start" menu.