YSI 6000UPG - Manual (Page 86)

5-14
+------------------------------------------------------------------------------+
¦
Sonde File Setup Real-Time Exit YSI PC6000 ¦
¦------------------------------------------------------------------------------¦
¦
¦
¦ ¦
¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦ Filename: SRUNS62O.DAT ¦ ¦
¦ ¦--------------------------------------------------------¦ ¦
¦ ¦ MODIFY ¦ VIEW ¦ SYSTEM ¦ ¦
¦ ¦------------------+------------------+------------------¦ ¦
¦ ¦ Parameters... ¦ Header ¦ Print Report ¦ ¦
¦ ¦ Control Info... ¦ Report ¦ Print Plot ¦ ¦
¦ ¦ Scaling Info... ¦ Plot ¦ Definitions... ¦ ¦
¦ ¦ ¦ Statistics ¦ Export ¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦------------------------------------------------------------------------------¦
¦
Generate a plot on the screen ¦
+------------------------------------------------------------------------------+
Select the Plot menu option to display a plot of the current data file to the screen. The plot can be
customized, see Parameters and Control Info above. A plot can be abandoned at any time by
pressing Esc, or paused by striking any other key. If a plot is too large to fit on one screen, it will
automatically move to a new screen.
+------------------------------------------------------------------------------+
¦
Sonde File Setup Real-Time Exit YSI PC6000 ¦
¦------------------------------------------------------------------------------¦
¦
¦
¦ ¦
¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦ Filename: SRUNS62O.DAT ¦ ¦
¦ ¦--------------------------------------------------------¦ ¦
¦ ¦ MODIFY ¦ VIEW ¦ SYSTEM ¦ ¦
¦ ¦------------------+------------------+------------------¦ ¦
¦ ¦ Parameters... ¦ Header ¦ Print Report ¦ ¦
¦ ¦ Control Info... ¦ Report ¦ Print Plot ¦ ¦
¦ ¦ Scaling Info... ¦ Plot ¦ Definitions... ¦ ¦
¦ ¦ ¦ Statistics ¦ Export ¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦------------------------------------------------------------------------------¦
¦
View statistics from the most-recently generated report/plot ¦
+------------------------------------------------------------------------------+
Select the Statistics menu option to view statistics of a data file, or portion of a data file. As with
reports and plots, the displayed statistics are affected by the choices you have made in the
Parameters, and the Control info menus described previously. To view statistics for a portion of a
file enter the start and stop times in Control Info. Statistics are only available after a report or plot
is run.