YSI 6000UPG - Manual (Page 89)

5-17
Select the Print Plot option to send your plot to the printer. After you select this option, a prompt
will appear on the screen asking if your printer is ready. Press Enter to proceed with the print
operation. Printing takes place after the plot is completely drawn on the screen.
Note: The printer port option (in the setup menu) specifies the computer port to which the report
will be sent.
+------------------------------------------------------------------------------+
¦
Sonde File Setup Real-Time Exit YSI PC6000 ¦
¦------------------------------------------------------------------------------¦
¦
¦
¦ ¦
¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦ Filename: SRUNS62O.DAT ¦ ¦
¦ ¦--------------------------------------------------------¦ ¦
¦ ¦ MODIFY ¦ VIEW ¦ SYSTEM ¦ ¦
¦ ¦------------------+------------------+------------------¦ ¦
¦ ¦ Parameters... ¦ Header ¦ Print Report ¦ ¦
¦ ¦ Control Info... ¦ Report ¦ Print Plot ¦ ¦
¦ ¦ Scaling Info... ¦ Plot ¦ Definitions... ¦ ¦
¦ ¦ ¦ Statistics ¦ Export ¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦------------------------------------------------------------------------------¦
¦
Select, modify, or create definitions of reports/plots ¦
+------------------------------------------------------------------------------+
Select the Definitions option to create and save different report or plot configurations from the
same data file. Each different file will contain all options and setup information you have defined
in the modify menus. See the MODIFY options earlier in this section. After you have selected
Definitions from the SYSTEM menu, the following menu will be displayed.
+------------------------------------------------------------------------------+
¦
Sonde File Setup Real-Time Exit YSI PC6000 ¦
¦------------------------------------------------------------------------------¦
¦
¦
¦ ¦
¦ Active definition: default report/plot ¦
¦ ¦
¦ Select an action: Select a definition ¦
¦ Create new definition ¦
¦ Rename active definition ¦
¦ Delete active definition ¦
¦ Clear active definition ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦------------------------------------------------------------------------------¦
¦
Select a definition to be active ¦
+------------------------------------------------------------------------------+