Auto-Zone Control Systems ZoneView Plus Software Manual (Version 01C) - Manual (Page 39)

ZoneView Plus
Computer Front End 33
View/Change Setpoints
If the Setpoints ICON is selected the user can modify the operation of the selected
controller. Each setpoint is passcode protected, so unauthorized users cannot
inadvertently change the operation of the system.
If the user is operating at the System Manager passcode level, they can set the passcode
access level of each setpoint on this screen. Move the cursor over the description box for
each setpoint and press the RIGHT mouse button. The following box will pop open
which allows the user to change from the default level 8 access to whatever is desired for
that setpoint.