Auto-Zone Control Systems ZoneView Plus Software Manual (Version 01C) - Manual (Page 57)

ZoneView Plus
Computer Front End 51
Select Font Color & Size
If the color or font size of the data field needs to be changed, then click on the Select Font
Color & Size menu item to activate the following configuration screen. You can
experiment with the various settings to get the effect you are looking for on your custom
screen. This sample screen uses the default settings.
Once all the data fields have been configured, the custom screen is now ready for access
through the communications port.
Accessing a Custom Screen
Access Custom Screen. Select this button while communications are active.
Once the custom screen has been created, it is now ready to load and access the units
defined for each data field placed on the screen. You cannot have the custom screen
editor active while communications are active so if you are still in the editor, exit that
function by selecting the Exit button on the toolbar (Not from the File Menu!).
If you are not currently in a communications mode, select the Go Online item under the
Communications menu to open the communications port. Now select the custom screen
button. The file dialog window will open allowing you to select which custom screen you
want to load. Once the screen is selected and loaded, communications should begin
immediately. The screen updates once every 30 seconds so if you need to refresh the data
more often, you can use the Force Immediate Upload button (see page 28) to cause a
polling to begin immediately.