Document Outline

• System Overview
  • 1.1. Product Description
  • 1.2. 1U and 2U FMS Devices
  • 1.3. Front Panel Indicators and Controls
  • 1.4. Terminal Block Designations
  • 1.5. Rear Panel Indicators
  • 1.6. SW1 Switch Settings
• Getting Started
  • 2.1. Installation
  • 2.2. Falcon FMS Wiring
    • 2.2.1 Power Supply and Ground Connections
    • 2.2.2 Universal Input Connections
    • 2.2.3 Relay 1 and 2 Connections
    • 2.2.4 Keypad Connection
    • 2.2.5 EIA-232 COM2 Connection
    • 2.2.6 RJ11 Phone Line Connection
    • 2.2.7 RJ45 Ethernet Connection
    • 2.2.8 Modbus EIA-485 Connections
    • 2.2.9 Modbus EIA-232 Connections
    • 2.2.10 Expansion Card A Connections
    • 2.2.11 Expansion Card C Connections
  • 2.3. Communication
    • 2.3.1 Set the FMS IP Address
    • 2.3.2 Set the IP Address Using the ARP and PING Commands
      • 2.3.2.1 Obtain the Ethernet Address (MAC Address)
      • 2.3.2.2 Use the ARP Command
      • 2.3.2.3 Use the PING Command
      • 2.3.2.4 Troubleshooting the ARP/PING Commands
    • 2.3.3 Set the IP Address Using a Web Browser
    • 2.3.4 Set the FMS IP Address using an EIA-232 Connection
• Web Interface Configuration
  • 3.1. Home Page
  • 3.2. Alarms
  • 3.3. Identity
  • 3.4. Configuration
    • 3.4.1 Inputs and Relays
      • 3.4.1.1 Main Card - Input Channels 1-8
      • 3.4.1.2 Expansion Card “A” Input Configuration
      • 3.4.1.3 Expansion Card “C” Input Configuration
      • 3.4.1.4 Internal Temperature and Internal Humidity Configuration
    • 3.4.2 Relay Configuration
    • 3.4.3 Input Groups
    • 3.4.4 System
    • 3.4.5 Alarm Management
    • 3.4.6 Trends
    • 3.4.7 Clock
    • 3.4.8 Schedules
    • 3.4.9 Battery Supply/Voltage
    • 3.4.10 URL Links (1-5) and URL Links (6-10)
    • 3.4.11 Links
    • 3.4.12 Nest/Egg
      • 3.4.12.1 Nest Map Configuration
      • 3.4.12.2 Egg Configuration
    • 3.4.13 Modem/Phone Numbers/Pagers
      • 3.4.13.1 Configure Phone Numbers
      • 3.4.13.2 Configure Phone Number 16 (PPP)
    • 3.4.14 Keypad/DTMF Access Users
    • 3.4.15 Internet Protocol
    • 3.4.16 User Administration (Web Access)
    • 3.4.17 Network Statistics
    • 3.4.18 ICMP Ping
    • 3.4.19 Email/DNS
    • 3.4.20 Email URL Links
    • 3.4.21 Network Time Protocol
    • 3.4.22 SNMP/Syslog
    • 3.4.23 BACnet
    • 3.4.24 Modbus/SNMP/BACnet/Telnet Master
    • 3.4.25 Modbus/SNMP/BACnet Slave Units
    • 3.4.26 PUE/DCiE/Summary/Average
      • 3.4.26.1 Designating PUE/DCiE Data
      • 3.4.26.2 PUE/DCiE Trending
    • 3.4.27 Map (Facility Mapping)
      • 3.4.27.1 Create An Interactive Map
      • 3.4.27.2 Add a Link to the FMS Home Page
      • 3.4.27.3 Back Up the Map Data
    • 3.4.28 Flash Program
    • 3.4.29 Product Registration
  • 3.5. History
    • 3.5.1 Alarm History
      • 3.5.1.1 Acknowledge Alarms
      • 3.5.1.2 Download Alarmhistory.txt
    • 3.5.2 Event History
    • 3.5.3 Digital Status History
    • 3.5.4 Keypad Access History
    • 3.5.5 Web Access History
    • 3.5.6 Data History
      • 3.5.6.1 Minute, Hour, and Day Views
      • 3.5.6.2 Data History Text Downloads
    • 3.5.7 Extended Trends
    • 3.5.8 Trap Log
  • 3.6. Relays
  • 3.7. URL Links
  • 3.8. Refresh
• Advanced Communications - Modbus, BACnet, and Telnet
  • 4.1. Modbus
  • 4.2. Hardware Connections
    • 4.2.1 EIA-232
    • 4.2.2 EIA-485
  • 4.3. Modbus Master
    • 4.3.1 Communications Logs
    • 4.3.2 Modbus Slave Register Display Log
    • 4.3.3 Modbus Packet Log
    • 4.3.4 Modbus Master Poll Data Log
    • 4.3.5 SMS/Text Modem Log
    • 4.3.6 BACnet Packet Log
    • 4.3.7 BACnet Master Data Log
  • 4.4. Import Modbus Information to a Physical Point
  • 4.5. Modbus/SNMP/BACnet Slave Units
    • 4.5.1 Register Configuration
    • 4.5.2 Read/Preset Modbus Register
    • 4.5.3 Preset Configuration
    • 4.5.4 Enumerated Labels Configuration
  • 4.6. Modbus/Slave Units Configuration – Modbus Master Branch Circuit Monitor– 4 or 16
    • 4.6.1 Modbus Register Links
      • 4.6.1.1 CB# Links
  • 4.7. Additional Modbus Information
    • 4.7.1 Slave Register Map
    • 4.7.2 Alarm Bit Map (Reg 40201–-40306)
    • 4.7.3 Configuration Codes (Reg 40401–40504)
  • 4.8. Telnet
    • 4.8.1 Hardware Connections
    • 4.8.2 Telnet/COM1 Configuration
    • 4.8.3 Telnet Communication
• EIA-232 Interface
  • 5.1. Unit Start Up
  • 5.2. Flash Executable Code
  • 5.3. Main Menu
    • 5.3.1 Network Configuration – netcfg
      • 5.3.1.1 Bootloader Menu
• Remote Access
  • 6.1. Remote Access Configuration
• Point-to-Point Protocol
  • 7.1. Configure the FMS
  • 7.2. Configure the PC
• Load Firmware and Configuration Data
  • 8.1. Load FMS Firmware
    • 8.1.1 Load Firmware Through the Web Interface
    • 8.1.2 Load Firmware Using TFTP Client
    • 8.1.3 Update FMS Firmware via the EIA-232 COM2 Port (X- Modem)
  • 8.2. Load and Save FMS Configuration Data
    • 8.2.1 Save Configuration Data
    • 8.2.2 Load Configuration Data
• FMS Expansion Cards
  • A.1. Expansion Card Descriptions
  • A.2. Expansion Card Installation
    • A.2.1 Install an Expansion Card in a 2U FMS
    • A.2.2 Install an Expansion Card in a 1U FMS
  • A.3. Convert Current Input Channels to Voltage Input Channels on Expansion Card A
• Analog Averaging
  • B.1. Analog Averaging Overview
  • B.2. How Analog Averaging Affects Values
• Analog Input 4-20mA Reference Chart
• FMS Accessories Wiring
  • D.1. Configuring a SeaHawk Device as an Analog Input
  • D.2. Wiring for Other Falcon FMS Accessories
• Alarm ID Reference Tables
  • E.1. Analog Tables
  • E.2. Digital Tables
• FMS Slot Designations
  • F.1. Input Slot Designation Table
  • F.2. Output Slot Designation Table
• Relay Control Logic
  • G.1. Falcon-EM Relay Logic
• SNMP v3
• RADIUS and LDAP
• Technical Specifications