2 customize ring back tone (transferring tone) – Welltech SIPPBX 6200A User Manual
Page 114
Advertising
4.2 Customize Ring Back Tone (Transferring Tone)
User can customize Ring Back Tone by uploading new wave file on SIPPBX 6200A. Please
record wave file format as PCM, Channel Mode: Mono, Frequency: 8K, Bit Rate: 16 bit.
Click Management, and then click the Music Upload. In Music Upload Table, click Press
Browse…, to select wave file, then Press Apply to upload special Ring Back Tone. After
Upload is finished, press Reboot to reboot system to renew Ring Back Tone.
- 114 -
Advertising