Welltech SIPPBX 6200A - Manual (Page 43)

- 43 -
into Call Group or Pickup Group.
DialPlan Define the dialing plan for Extension. It specifies the location of
the instruction used to control what the phone is allowed to do,
and what to do with incoming calls for this extension. In this
field, you can Choose 5 dial level for Extension, including
[ext-only], [ext+R1], [ext+R12], [ext+R123], [ext+allroutes].
You can define an “Outgoing call” record, to a certain Route
Level, as R1, R2…, etc. [ext-only] means this subscriber can
only call to Extension. [ext+R1] means the subscriber with
such DialPlan can call to Extension and Route Level with R1.
[ext+R12] means the subscriber with such DialPlan can call to
Extension and Route Level with R1 and R2. [ext+R123] means
the subscriber with such DialPlan can call to Extension and
Route Level with R1, R2 and R3. [ext+allroutes] means the
subscriber with such DialPlan can call to Extension and Route
Level with R1, R2, R3 and R4.
Note:
For more information about Route Level, please refer to the
user manual: CH3.1.8 Outgoing Routing.
NAT Traversal If the Extension device is behind a device performing NAT, such
as firewall or router, and need to register to SIPPBX 6200A on
public network, then user has to enable this function. Enable
NAT Traversal to force SIPPBX 6200A to ignore the contact
information for the Extension and use the address from which
the packets are being received.
BLF Enable BLF function for extensions.
Mail Box User can select to disable or enable mail box function. If this
function is enabled, user could input e-mail address for the
Extension. When having voice mail of incoming call, system will
send this voice mail to the specified e-mail address. You can
also login the mail box system by dialing to *98, if you are
using an SIPPBX 6200A.
Save VM to Local If you select Enable to Save VM To Local, when you have Voice
Mail message, will backup to Local folder.
VM Login Password SIPPBX 6200A has a built-in voice mail system. And user can
login voice mail system by dialing to *98, then input the
mailbox number and password for voice mail. The password
will automatically increase by 1 digit. User can define the Voice
Mail box login password here. Another way to login the voice
mail system is dial to *98+extension number. For example, dial