Welltech SIPPBX 6200A - Manual (Page 51)

3.1.6 Trunk
User has to set Trunk account for Trunk (FXO device, e.g. WellGate 2540 or 2680) to
register to SIPPBX 6200A or set some necessary configuration for SIP trunk.
To change your Trunk, click Configuration, and then click the Trunk table. The screen
appears as shown below.
Figure Configuration: Trunk
The following table describes the table in this screen
Table Configuration:
Trunk
Label Description
Select Select this check box, then modify or delete it.
Trunk Number This field shows the Trunk Number information
Comment This field shows the Comment information
NAT Traversal This field shows the NAT Traversal information
Maximum Channels This field shows the Maximum Channels information
Add Click on the Add button, then display Trunk Setting screen.
Modify A Trunk Number can be modified by clicking on the checkbox
next to the Trunk Number and click on the Modify button.
Delete A Trunk Number can be deleted by clicking on the checkbox
next to the Trunk Number and click on the Delete button.
Total Count This field shows Total Count information.
Number Search Enter the search number, then click enter key. The screen will
display matched search data.
Total Page This field shows Total Page information.
Page This field shows Page Number information. You can Enter page
- 51 -