Welltech SIPPBX 6200A - Manual (Page 83)

- 83 -
Label Description
WAN
IP Support Select use IP mode, provide IPv4, IPv6, IPv4/IPv6.
Mode Select SIPPBX 6200A WAN port network mode to be Fixed IP,
DHCP or PPPoE.
IP Address Enter the IP Address. If user has set SIPPBX 6200A to be fixed
IP mode.
Subnet Mask Enter the Subnet Mask Address. If user has set SIPPBX 6200A
to be fixed IP mode.
Default Gateway Enter the Default Gateway Address. If user has set SIPPBX
6200A to be fixed IP mode.
Primary DNS Enter the IP address for Primary DNS. The default is
168.95.1.1.
Secondary DNS Enter the IP address for Secondary DNS. The default is null.
Default Gateway
Backup Select Enable option, if any connection problem occurred on
primary default gateway connections, all the traffic will be
guided and switched to the secondary default gateway for
proper operation. The default is Disable.
Secondary Default
Gateway Enter the Secondary Default Gateway. If you choose the
Default Gateway Backup to Enable.
Check Point Enter the Check Point IP address. SIPPBX 6200A Ping this IP
address to check if there are any connection problem occurred
on primary default gateway connections. If you choose the
Default Gateway Backup to Enable.
Current use Default
Gateway This field will display current used Default Gateway IP address.
PPPoE ID Enter the PPPoE ID. If you choose the Mode to PPPoE.
PPPoE PWD Enter the PPPoE Password If you choose the Mode to PPPoE.
IPV6 Mode Select Manual option, you can enter IP Address/ Prefix Length/
Gateway.
IPV6 IP Address Enter the IPV6 IP Address.
IPV6 Prefix Length Enter the IPV6 Prefix Length. The default is 64.
IPV6 IP Gateway Enter the IPV6 default Gateway Address.
MAC This field shows the MAC address. The MAC address cannot be
modified.
LAN (IPV4)
IP Address Enter the IP Address. The default is 192.168.123.123.
Subnet Mask Enter the Subnet Mask Address. The default is 255.255.255.0.
MAC This field shows the MAC address. The Mac address cannot be