Welltech SIPPBX 6200A - Manual (Page 36)

- 36 -
When this function is enabled, SIPPBX 6200A will check the
status of called party every 20 seconds, at most 15 times. That
means the camp-on function may be performed when called
party is idled after 20 seconds at most. And 300 (20*15)
seconds later, this function will not be workable.
CLIR (per call) Prefix Default is *67. Add this prefix will hide the caller’s number. For
example, 101 does not want to show the caller id to 102. The
101 can dial to "*67102", where the *67 is the prefix for CLIR.
When 102 got the incoming call, the LCD of 102 should display
"Anonymous". If 101 dials to "102", 102 should see the Caller
ID as 101.
CLIR Activated Default is *31. For example, 101 dial to "*31", SIPPBX 6200A
should add the CLIR record for 101 into its database. When 101
call to 102, 103...,etc. The LCD of called party should always
show "Anonymous".
CLIR Deactivated Default is *32. Dialing to *32 will remove the CLIR record from
the database of SIPPBX 6200A.
Ext Pwd Activated Ext Pwd means extension password. This is a personal
password for external outgoing call. For example, ext 101 dial
to *80+123, The Ext Pwd is activated. From now on, the ext
101 must enter the password 123 prior to make external
outgoing calls which are defined in the [Outgoing Routing]
page..
Ext Pwd Deactivated This is a feature code to disable extension password (Ext Pwd).
Apply Click on the Apply button to save your customized settings and
exit this screen.
Cancel Click on the Cancel button to begin configuration this screen
afresh.