Yaskawa SmartTrac AC1 - Manual (Page 14)

SMART TRAC AC1
2-2
••
Smart Trac AC1 Technical Manual TM 3554-000
Table 1. Smart Trac AC1 Specifications
Characteristic Specification
Ratings: 0.75 to 100 HP at 230 VAC
1.0 to 1600 HP at 460 VAC
2.0 to 200 HP at 600 VAC
Amperes 3.2 to 1,600 amps, depending on model
Input Power – 208/230V
Class Voltage: 3 Phase 200/208/220/230 VAC +10%, -15%
Frequency: 50/60 Hz ± 5%
Output Power-208/230V
Class Voltage: 0-230V (proportional to input voltage)
Frequency: 0-400 Hz (V/Hz pattern selectable)
Input Power –
380/415/460V Class Voltage: 3 Phase 380/400/415/440/460 VAC +10%, -15%
Frequency: 50/60 Hz ± 5%
Output Power–
380/415/460V Class Voltage: 0-460V (proportional to input voltage)
Frequency: 0-400 Hz (V/Hz pattern selectable)
Input Power –
575 / 600 V Class
Voltage: 3 Phase 500/ 575/ 600 VAC ±10%
Frequency: 50/60 Hz ± 5%
Output Power–
575 / 600 V Class
Voltage: 0-575V (proportional to input voltage)
Frequency: 0-400 Hz (V/Hz pattern selectable)
Overload Capacity 150% for 1 minute
Enclosure Types NEMA 1 Protected Chassis, NEMA 4 , or NEMA 12
Ambient Operating
Temp. 0°C to 40° C
Storage Temperature -20° C to 60° C
Humidity 95% RH non-condensing
Vibration 1G<20Hz, 0.2G 20 to 50 Hz
Location Indoor, protected from corrosive gases and dust
Elevation 3300 ft (1000 M) or less
Specifications