Yaskawa SmartTrac AC1 - Manual (Page 69)

SMART TRAC AC1
Technical Manual TM 3554-000 Smart Trac AC1 Maintenance
••
7-7
must appear, clearly legible, on the outside of the shipping container and on the
customer packing list.
If MagneTek does not receive the item at the factory within 60 calendar days,
the authorization to return shall expire and the request must be re-authorized.
If an item being returned is for credit or non-warranty repair, contact
MagneTek's Repair Department for the Return Authorization number and form
F0301603. Complete the form and return with the item. If not received within
two (2) weeks, the return authorization will be canceled and any items received
by MagneTek will be returned to you, freight collect.
In the event of a potential warranty failure, immediately contact the Product
Service Center for technical and procedural guidance. If an item is subsequently
returned under suspect warranty terms, the Product Service Center Return
Authorization number and return instructions apply.
WARNING WARNING -- ESD ESD
The Smart Trac electronics are electrostatic sensitive devices. Follow
Electrostatic Discharge (ESD) procedures when handling to protect
components. Failure to follow ESD procedures may result in damage to
the Smart Trac AC1 or its components. Failure to comply may result in
personal injury or death.
Return your Smart Trac in its original packaging whenever possible. If the
original packaging has been discarded, or if you have questions, contact your
MagneTek representative.
Repackaging