Canon i-SENSYS MF244dw - Manual (Page 292)

Network Settings
1525-05A
All the settings about the network are listed with short descriptions. Default
settings are marked with a dagger ( ).
If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press . Setting the
System Manager PIN(P. 228)
Select Wired/Wireless LAN(P. 286)
Wireless LAN Settings(P. 286)
Direct Connection Settings (P. 288)
TCP/IP Settings(P. 289)
SNMP Settings(P. 293)
Dedicated Port Settings(P. 294)
Waiting Time for Connection at Startup(P. 295)
Ethernet Driver Settings(P. 295)
IEEE 802.1X Settings(P. 295)
Initialize Network Settings(P. 295)
Select Wired/Wireless LAN
When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when
switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using
the following <Wireless LAN Settings>). Selecting Wired LAN or Wireless LAN(P. 167)
Wired LAN
Wireless LAN
Wireless LAN Settings
Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the
setting for saving power consumption. See "Getting Started" Manuals Included with the Machine(P. 425) .
SSID Settings
Select to configure a wireless connection by specifying information including an SSID or a network key by
inputting manually from the operation panel.
Select Access Point
Wireless LAN routers that can access the machine are automatically located, so you can select from the list.
You must manually enter a network key, such as a WEP key or a PSK. Setting Up Connection by Selecting
a Wireless Router(P. 176)
Setting Menu List
286