Loading preprinted paper, Loading preprinted, Paper(p. 51) – Canon i-SENSYS MF244dw User Manual
Page 57: Making 1-sided printouts on paper with logos
Loading Preprinted Paper
1525-00X
When you use paper that has been preprinted with a logo, pay attention to the orientation of the paper when loading.
Load the paper properly so that printing is performed on the correct side of the paper with a logo.
Making 1-Sided Printouts on Paper with Logos(P. 51)
Making 2-Sided Printouts on Paper with Logos (MF244dw)(P. 52)
This section mainly describes how to load preprinted paper with the proper facing and orientation. For a
description of the general procedure for loading paper in the paper drawer or manual feed slot, see Loading
Paper in the Paper Drawer(P. 44) or Loading Paper in the Manual Feed Slot(P. 47) .
Making 1-Sided Printouts on Paper with Logos
Load the paper with the logo side (the side to print the document) face up.
Load only one sheet of paper in the manual feed slot each time you print.
Printing on Paper with Logos in Portrait Orientation
Printing on Paper with Logos in Landscape Orientation
Basic Operations
51