Canon i-SENSYS MF244dw - Manual (Page 295)

Use Custom Network Key
Off
On
Network Key (10 Char.)
<Network Settings> <Direct Connection Settings> <Access Point Mode
Settings> Select <Use Custom SSID> or <Use Custom Network Key> <On>
Set SSID Settings or Network Key Settings <Apply>
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4 Settings
Specify settings for using the machine in an IPv4 network.
IP Address Settings
Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
network. Setting IPv4 Address(P. 187)
Auto Acquire
Select Protocol
Off
DHCP
BOOTP
RARP
Auto IP
Off
On
Manually Acquire
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway Address: 0.0.0.0
Check Settings
Auto Acquire
IP Address
Subnet Mask
Gateway Address
PING Command
Select to check that the machine is connected to a computer over a network. Testing the Network
Connection(P. 189)
DNS Settings
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions.
Configuring DNS(P. 211)
Setting Menu List
289