Canon i-SENSYS MF244dw - Manual (Page 311)

UTC
Coordinated Universal Time (UTC) is the primary time standard by which the world regulates clocks and
time. The correct UTC time zone setting is required for Internet communications.
<Timer Settings> <Date/Time Settings> <Time
Zone> Select a time zone
Daylight Saving Time Settings *
Enable or disable daylight saving time. If daylight saving time is enabled, specify the dates from which and to
which daylight saving time is in effect.
Off
On
Start: Month, Day
End: Month, Day
<Timer Settings> <Date/Time Settings> <Daylight Saving Time
Settings> <On> Select a starting month and day
<Apply> Select an ending month and day <Apply>
Auto Sleep Time
If the machine has not been operated or has had no data to process for a specified period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power. Entering Sleep Mode(P. 59)
1 to 30 (min.)
Auto Reset Time
If a key is not pressed for a specified period of time, the screen and the settings are initialized to display the default
screen (Auto Reset). Specify the interval at which the Auto Reset is performed. Select <0> to disable the Auto Reset
function. The Auto Reset is not performed in the following cases:
● The setting menu is displayed.
● The machine is processing data, such as when printing documents.
● An error message is displayed and the error indicator is blinking (However, Auto Reset is performed when the error
does not prevent the user from continuing to use a function.)
Setting Menu List
305