ProSoft Technology MVI56E-MCM/MCMXT - Manual (Page 102)

Diagnostics and Troubleshooting MVI56E-MCM ♦ ControlLogix Platform
User Manual Modbus Communication Module
Page 102 of 199 ProSoft Technology, Inc.
June 18, 2014
If PCB is unable to connect to the module:
1 Click the B ROWSE D EVICE ( S ) button to open the ProSoft Discovery Service.
Select the module, then right-click and choose S ELECT FOR PCB.
2 Close ProSoft Discovery Service, and click the C ONNECT button again.
3 If these troubleshooting steps fail, verify that the Ethernet cable is connected
properly between your computer and the module, either through a hub or
switch (using the grey cable) or directly between your computer and the
module (using the red cable).
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.