ProSoft Technology MVI56E-MCM/MCMXT - Manual (Page 92)

Diagnostics and Troubleshooting MVI56E-MCM ♦ ControlLogix Platform
User Manual Modbus Communication Module
Page 92 of 199 ProSoft Technology, Inc.
June 18, 2014
8 Click T EST C ONNECTION to verify that the physical path is available. The
following message should be displayed upon success.
9 Click OK to close the Test Connection pop-up and then click C ONNECT to
close the Connection Set up dialog box. The Diagnostics menu is now
connected through CIPconnect.
5.5.2 Using RSWho to Connect to the Module
You need to have RSLinx installed on your PC to use this feature. You also need an ENBT module
set up in the rack. For information on setting up the ENBT module, see Using CIPconnect to
Connect to the Module.
1 In the tree view in ProSoft Configuration Builder, right-click the MVI56E-MCM
module.
2 From the shortcut menu, choose D OWNLOAD FROM PC TO D EVICE .