Storage – OM SYSTEM Tough TG-7 Digital Camera (Red) User Manual
Page 243
Storage
When not using the camera for a prolonged period, remove the battery and card. Store the camera
in a cool, dry place that is well ventilated.
Insert the battery periodically and test the camera’s functions.
Clean the camera after use.
Do not store in the same place as insect repellent.
In order to protect the camera from corrosion, avoid storing the camera in places where chemicals
are treated.
Mold may form on the lens surface if the lens is left dirty.
Check each part of the camera before use if it has not been used for a long time. Before taking
important pictures, be sure to take a test shot and check that the camera works properly.
Pixel Mapping - Checking the image processing
functions
The pixel mapping feature allows the camera to check and adjust the image sensor and image
processing functions. For best results, wait at least a minute after shooting and playback have ended
before performing pixel mapping.
Highlight
.
Press the OK button when [Start] (Submenu 2) is displayed.
The [Busy] bar is displayed when pixel mapping is in progress. When pixel mapping is
finished, the menu is restored.
If you accidentally turn the camera off during pixel mapping, start again from Step 1.
243
Cleaning and storing the camera
1.
2.