OM SYSTEM Tough TG-7 Digital Camera (Red) - Manual (Page 25)

After confirming that the battery is inside the camera, connect
the camera to a USB device using an USB cable.
The menu will be displayed on the monitor.
USB
Charge
Exit
MTP
Storage
Set
The indicator lamp will be lit while charging is in
progress. Charging time varies depending on the output
specifications of the connected USB device. The indicator
lamp turns off when charging is complete.
When to charge the batteries
If the camera displays the message shown in the illustration, charge the battery.
125 F5.6
ISO-A
200
L N
S-IS ON S-IS ON
0.0 0.0 01:02:03 01:02:03
1023 1023
P
FHD
30p 30p
F
Battery Empty
1
Flashes in red
Charging with a USB device
The battery inside the camera can be charged by connecting the camera to a commercially available
USB device using a USB cable.
Highlight [Charge] using the FG buttons on the arrow pad and press the OK button.
If the indicator lamp is not lit, reconnect the USB cable and USB-AC adapter to the camera.
25
Charging the Battery
1
1.
2.
C