OM SYSTEM Tough TG-7 Digital Camera (Red) - Manual (Page 59)

Rotate the mode dial to
P
,
A
, n , or 7 .
If the mode dial is rotated to 7 , select f (Microscope
Control).
If the mode dial is rotated to
P
,
A
, or n , the monitor
display zoom is increased by 2×, and S is displayed.
Images are recorded at the selected zoom ratio. Press H
again to cancel zoom.
125 F5.6
ISO-A
200
L N
S-IS ON S-IS ON
0.0 0.0 01:02:03 01:02:03
1023 1023
P
FHD
30p 30p
F
2
Zoom (digital teleconverter)
Zoom in on the center of the frame and record. In
P
,
A
, and n modes, the zoom ratio increases by
about 2×. When f (Microscope Control) is selected in 7 mode, you have a choice between 2× and
4× zoom.
If the mode dial is rotated to
P
,
A
, or n , press H .
If the mode dial is rotated to 7 , press I .
If the mode dial is rotated to 7 , pressing I increases zoom by 2×. Press I again for 4×
zoom, and a third time to cancel zoom.
JPEG images are recorded at the selected zoom ratio. In the case of RAW images, a frame shows the
zoom crop. A frame showing the zoom crop is displayed on the image during playback.
In the case of 4K and high-speed movies, the digital teleconverter is automatically disabled when
recording starts.
[AF Area] is fixed at [
X ] (single target).
59
Zoom (digital teleconverter)
1.
2.
B
B
B