OM SYSTEM Tough TG-7 Digital Camera (Red) - Manual (Page 249)

Error codes
Monitor indication Possible cause/Corrective action
No Card
No card inserted or card not recognized.
Insert a card or remove and reinsert the current card.
Card Error
There is a problem with the card.
Insert the card again. If the problem persists, format the card. If the card
cannot be formatted, it cannot be used.
Write Protect
Writing to the card is prohibited.
The card write-protect switch is set to the “LOCK” side. Return the switch to
the unlocked position (
P.21 ).
Card Full
The card is full and no additional pictures can be taken.
Replace the card or erase unwanted pictures.
Before erasing, download important images to a PC.
Card Full
There is no space in the card.
Replace the card or erase unwanted pictures.
Before erasing, download important images to a PC.
No Picture
There are no pictures to play back.
The card contains no pictures.
Take pictures before beginning playback.
Picture Error
The selected file is damaged and cannot be played back. Alternatively,
the picture is in a format that is not supported by the camera.
View the picture using computer imaging software or another method.
If the picture cannot be displayed on a computer, the file may be corrupt.
The Image Cannot Be
Edited
Camera retouch features cannot be applied to pictures recorded with
other devices.
Retouch the picture on a computer or other device.
249
Error codes