Symmetricom EDGE CLOCK 1000 - Manual (Page 47)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 47
Chapter 2 Engineering and Ordering Procedures
Input Modules
Rear Access
The rear-access Expansion Panel (part number 990-58102-01) provides an
additional 32 outputs, for a system total of 64 outputs. The NEBS-style Expansion
Panel supports up to four additional Output Modules with various connector types;
each Output Module provides up to eight output signals. See
Table 2-2 for part
numbers for Output modules.
Input Modules
Six Input modules are available to match the wiring scheme and termination
impedance requirements at the installation site. Select one of these Input modules
for use with your TimeProvider system.
Table 2-1 lists the Input modules available
for the TimeProvider.
Output Modules
Symmetricom has eight Output modules available for the TimeProvider that allow
you to select the proper termination for your application. You can install any
combination of up to four Output modules in the main shelf or in the available
Expansion Panel.
Table 2-2 lists the Output modules available for the TimeProvider.
Table 2-1. Input Modules Available for the TimeProvider
Part Number Description
090-58061-01 BNC Input module
090-58061-02 Wire-wrap Input module
090-58061-03 DB9 Input module
090-58061-04 SMZ/BT43 Input module
090-58061-05 Metric (Siemens) 1.0/2.3 Input module
090-58061-06 Metric (Siemens) 1.6/5.6 Input module
Table 2-2. Output Modules and Accessories Available for the TimeProvider
Part Number Description
090-58091-01 BNC Output module
090-58091-02 Wire-wrap Output module
090-58071-02 WW Output module for TIA/EIA-B-422 (installed in Main shelf only)