Symmetricom EDGE CLOCK 1000 - Manual (Page 48)

Chapter 2 Engineering and Ordering Procedures
IMC and IOC Modules
48 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008
IMC and IOC Modules
Symmetricom has several modules available for the TimeProvider that provide
varying levels of clock stability. You can install any combination of IOC modules in
the main shelf (Rb-Rb, Rb-Qtz, Qtz-Qtz, Qtz-Rb).
Table 2-3 lists the IOC and IMC
modules available for the TimeProvider.
090-58091-03 DB9 Output module – four connectors
090-58091-04 SMZ/BT43 Output module
090-58091-05 Metric (Siemens) 1.0/2.3 Output module
090-58091-06 Metric (Siemens) 1.6/5.6 Output module
090-58091-07 DB9 Output module – eight connectors
090-58081-02 T1 Retimer module spare, WW (installed in the main shelf only)
090-58082-01 E1 Retimer module spare, BNC (installed in the main shelf only
090-58091-99 Blank module (cover for any unused Output module locations)
093-58091-07 Backshell and pin kit for the DB9 Output module (8 sets)
Table 2-3. IOC and IMC Modules Available for the TimeProvider
Part Number Description
090-58021-01 Quartz IOC, single-oven
090-58022-01 Rubidium IOC
090-58031-01 IMC
090-58041-01 IMC with Integrated TimeProvider Interface Unit (IMC/TPIU)
090-58021-99 Blank Clock Module cover
Table 2-2. Output Modules and Accessories Available for the TimeProvider (Continued)
Part Number Description