Symmetricom EDGE CLOCK 1000 - Manual (Page 69)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 69
Chapter 3 Installing the TimeProvider
Making Connections
Making Retimer Connections
The front panel of the E1 Retimer module and T1 Retimer module (shown in
Figure 3-16 ) indicates the input and output connections for a typical installation.
Side 1 of the Retimer provides 3R (Re-shape, Re-amplify, and Re-time) for the E1
or T1 signal to a client Network Element.
Figure 3-16. Front Panel of the T1 (wire-wrap) and E1 (BNC) Retimer Modules
Figure 3-17 illustrates a sample schematic for connecting a Retimer connected to
both sides of a DSX-1 panel in a Central Office.
Figure 3-17. Sample Installation Schematic for a Retimer