Lucent Technologies 6000 - Manual (Page 158)

4-26 MAX 6000/3000 Network Configuration Guide
Configuring Individual WAN Connections
The Connection profile
NUI and PAD parameters
The remainder of the parameters in Ethernet > Connections > Connection profile > Encaps
Options provide NUI and PAD settings:
Encaps=X25/T3POS
When Connections > Connection profile > Encaps=X25/T3POS, the following parameters
appear in the interface for Ethernet > Connection > Connection profile > Encaps Options:
Ethernet
Connections
Connection profile
x.25 Prof
Recv PW
Host init. mode
DTE init. mode
ENQ handling
Max. Block Size
T3POS T1
T3POS T2
T3POS T3
T3POS T4
T3POS T5
T3POS T6
Parameter Specifies
NUI Set of Network User Identification-related facilities to use in the next
call request. NUI provides information to the network for billing,
security, and network management, and to invoke subscribed facilities.
PAD Banner Msg Banner message that the user or a calling device sees when starting an
X.25 PAD (Triple-X) session on the unit. The PAD user can be either a
user or a calling device running a script. You can specify up to 32
characters. The default is null.
PAD Prompt PAD prompt. You can specify up to 12 characters. The default is null.
NUI Prompt Network User Identification (NUI) prompt for a PAD application. You
can specify up to 15 characters. The default is null. The value of NUI
Prompt overrides any value entered in the NUI setting. Encaps must be
set to X25/PAD for NUI to be applicable.
NUI PW Prompt NUI password prompt for a PAD application. You can specify up to 12
characters. The default is null. This parameter is used as Call User
Data in the outbound Call Request Packet.
PAD Alias #N A string for single-command substitution. You can specify up to 40
characters. The default is null. For one command string (including a
space) to be treated as equivalent to another, you must enter a slash (/)
between the two strings. Encaps must be set to X25/PAD for PAD
Alias to be applicable.