The frame relay connection parameters, The frame relay connection parameters -14, Gateway connections (encaps=fr) – Lucent Technologies 6000 User Manual
Page 262
5-14
Preliminary January 4, 2001
MAX 6000/3000 Network Configuration Guide
Configuring Frame Relay
Configuring a DLCI logical interface
For gateway connections:
Ethernet
Connections
Connection profile
Encaps=FR
Encaps options...
FR Prof=pacbell
DLCI=16
Circuit=N/A
Route IP=Yes
Ip options...
LAN Adrs=10.2.3.4/24
For Frame Relay circuits:
Ethernet
Connections
Connection profile
Encaps=FR_CIR
Encaps options...
FR Prof=pacbell
DLCI=16
Circuit=circuit-1
For FR Direct connections:
Ethernet
Connections
Connection profile
Encaps=PPP
Route IP=Yes
Ip options...
LAN Adrs=10.2.3.4/24
Session options...
FR Direct=Yes
FR Prof=pacbell
DLCI=16
The Frame Relay connection parameters
This section provides some background information about the Frame Relay connection
parameters. For detailed information about each parameter, see the MAX Reference.
Gateway connections (Encaps=FR)
Gateway connections require FR encapsulation, a Frame Relay profile name, and a DLCI.
Your Frame Relay provider tells you the DLCI to assign to each connection.
A Connection profile that specifies Frame Relay encapsulation must include a DLCI to
identify the first hop of a permanent virtual circuit (PVC). The MAX does not allow you to
enter duplicate DLCIs, except when they are carried by separate physical links specified in
different Frame Relay profiles.