Lucent Technologies 6000 - Manual (Page 278)

5-30 Preliminary January 4, 2001 MAX 6000/3000 Network Configuration Guide
Configuring Frame Relay
Configuring the MAX as a Frame Relay switch
Ascend-Route-IP=Route-IP-No,
Ascend-FR-DLCI=200,
Ascend-FR-Profile-Name="fr-asnd-b",
Ascend-FR-Circuit-Name="pvc-pipe"
Examples of circuits that use UNI and NNI interfaces
Figure 5-12 shows circuit configurations that use one UNI-DCE and one NNI interface.
Figure 5-12. Frame Relay circuit with UNI and NNI interface
Using local profiles
The following parameters on MAX-42 define the datalinks to the MAX and MAX-39:
Ethernet
Frame Relay
dce-max
Name=dce-max
Active=Yes
FR Type=DCE
Nailed Grp=555
Ethernet
Frame Relay
nni-39
Name=nni-39
Active=Yes
FR Type=NNI
Nailed Grp=999
DTE DCE
DLCI 100
NNI NNI
DLCI 200
DCE DTE
DLCI 300
P130
MAX
MAX-42 MAX-39