Call routes profile, Viewing call routes with the do command, Call routes profile -102 – Lucent Technologies 6000 User Manual

Page 234: Viewing call routes with the do command -102

Advertising
background image

4-102

MAX 6000/3000 Network Configuration Guide

Configuring Individual WAN Connections
Configuring POTS capability on the MAX 6000 and MAX 3000

The alternative profile appears.

2

Press Ctrl-D to access the DO menu.

The DO menu appears.

3

Select L (Load).

Note:

The Load option does not appear when you are in the active profile.

4

The alternative profile becomes the active profile.

Call Routes profile

You must configure a Call Routes profile to specify how the MAX unit handles the call. In the
System profiles, you can configure up to 64 Call Routes profiles. The MAX uses the profiles to
control the routing of POTS calls. When a call matches Phone Number, Src Slot, Src Port and
Call Rte Type, the unit routes the call as specified by the other parameters in that profile.

In each System > Call Routes profile, set the following parameters to identify and activate the
profile:

Viewing Call Routes with the DO command

The View Call Routes DO command (Ctrl-D, K) displays several fields of currently active call
routes (in the order in which they would be searched). This display also shows the specific call
route profile (in System > Call Routes) that was used to generate the call route.

Parameter

Specifies

Name

Name of the profile.

Active

Profile is active if this parameter is set to Yes.

Every call will be matched against the following parameters:

Phone
Number

Destination telephone number of the call.

Src Slot

Call’s source slot number.

Src Port

Call’s source port number.

Call Rte Type

Call’s type of call to which this call route applies.

Set the following parameters to specify how the MAX routes calls that match the profile:

Dst Chan Grp

Call’s destination MAXDAX channel group.

Dst Trnk Grp

Call’s destination trunk group.

Dst Slot

Call’s destination slot.

Dst Port

Call’s destination port.

Dial Plan

Number that identifies the Dial Plan profile to apply to the call.

Rewrt Pattn

Telephone number that the unit compares to a number entered by a POTS
user.

Rewrt Replce

Telephone number that replaces the number entered by a POTS user.

Advertising
This manual is related to the following products: