Lucent Technologies 6000 - Manual (Page 223)

Configuring Individual WAN Connections
Configuring a Combinet connection
MAX 6000/3000 Network Configuration Guide 4-91
3 Specify the port on which the immediate-modem feature functions, and specify a
password for modem access. For example:
Ethernet
Mod Config
TServ Options
Imm. Modem port=5000
Imm. Modem Pwd=dialoutpwd
4 Exit the profile and, at the exit prompt, select the exit and accept option.
Configuring a Combinet connection
The MAX unit supports Combinet bridging to link two LANs as if they were one segment. For
a Combinet connection to work, bridging must be enabled at the system level (as described in
Chapter 14, “Configuring Packet Bridging”). Figure 4-16 shows a Combinet connection.
Figure 4-16. A Combinet connection
Combinet configuration involves the following parameters (shown with sample settings):
Ethernet
Mod Config
Bridging=Yes
Ethernet
Answer
Encaps
COMB=Yes
COMB Options
Password Reqd=Yes
Interval=10
Compression=Yes
Ethernet
Connections
000145CFCF01
Station=000145CFCF01
Encaps=COMB
Bridge=Yes
Encaps Options
Password Reqd=Yes
Send PW=remotepw
Recv PW=localpw
Interval=10
Base Ch Count=2
Compression=Yes
MAX
WAN
Combinet unit