Lucent Technologies 6000 - Manual (Page 328)

6-42 MAX 6000/3000 Network Configuration Guide
Configuring X.25
Always On/Dynamic ISDN (AO/DI)
For AO/DI B-channel accounting records, an NAS-Port value such as 10123 should be
interpreted as:
• 1=digital service
• 01=line number
• 23=channel number
However, the NAS-Port value for an AO/DI X.25 SVC accounting record has a different
meaning. An NAS-Port value such as 10123 should be interpreted as:
• 1=digital service
• 01=X.25 nailed group
• 23=X.25 SVC channel number/Logical Channel Number (LCN)
For easy identification of each X.25 SVC call, Lucent recommends that the X.25 nailed group
be set to a number outside the PRI line number range (such as 25).
Stop records
The following example shows the details of a RADIUS accounting Stop record for an X.25
SVC session of an active AO/DI call:
Sun Jan 17 12:42:44 1999
User-Name="aodi1"
NAS-Identifier=12.12.6.212
NAS-Port=12501
NAS-Port-Type=Sync
Acct-Status-Type=Stop
Acct-Delay-Time=0
Acct-Session-Id="285427838"
Acct-Authentic=RADIUS
Acct-Session-Time=140
Acct-Input-Octets=2398
Acct-Output-Octets=12072
Acct-Input-Packets=55
Acct-Output-Packets=176
Ascend-Disconnect-Cause=1
Ascend-Connect-Progress=83
Ascend-Xmit-Rate=9600
Ascend-Data-Rate=9600
Ascend-PreSession-Time=1
Ascend-Pre-Input-Octets=194
Ascend-Pre-Output-Octets=157
Ascend-Pre-Input-Packets=9
Ascend-Pre-Output-Packets=9
Ascend-First-Dest=14.14.1.212
Ascend-Multilink-ID=2
Ascend-Num-In-Multilink=0
Ascend-Modem-PortNo=3
Ascend-Modem-SlotNo=9
Framed-Protocol=MP
Framed-Address=13.13.1.201