Lucent Technologies 6000 - Manual (Page 313)

Configuring X.25
Configuring X.32 profiles for incoming switched X.25 connections
MAX 6000/3000 Network Configuration Guide 6-27
******
PROMPT>
PROMPT> profile 6 */User loads the CUSTOM profile. */
PROMPT> set 1:1 /* User sets the Escape char to ctrl-P */
PROMPT> n 031454159782738 /* User places X.25 call. */
PROMPT>
COM /* X.25 call connected. */
PROMPT> <ctrl-P> /* After exchanging some data with the called host,
the user escapes to command mode. */
PROMPT>
PROMPT> clr /* User clears the X.25 call. */
CLR CONF
PROMPT>
PROMPT> storeprofile 6 /* User saves the changed parameters to the
CUSTOM profile */
PROMPT>
PROMPT>+++ /* User quitting modem call */
OK
% ath
OK
Configuring X.32 profiles for incoming switched X.25
connections
For MAX 6000 units, X.32 profiles include a parameter called Appl Mode (Ethernet >
Connections > Connection profile > X.32 > Encaps Options > Appl Mode), which has two
settings. The first setting, Net2Net (the default), enables you to route incoming calls to the
nailed X.25 connection. The other setting, ISDN Pkt Mode, enhances AO/DI functionality
by enabling the MAX unit to accept the ISDN packet-mode call and establish an on-demand
packet-mode X.25 connection supporting up to two X.25 sessions.