Lucent Technologies 6000 - Manual (Page 75)

Configuring WAN Access
Configuring digital modems
MAX 6000/3000 Network Configuration Guide 3-31
ascend% show modems
slot:item modem status
8:0 1 idle
8:1 2 idle
8:2 3 idle
8:3 4 idle
8:6 5 idle
8:7 6 idle
8:10 7 idle
8:11 8 idle
12-MOD modem numbering
Modems in the 12-MOD K56Flex modem card are numbered 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 12, 13.
For example, if you have a 12-MOD K56Flex modem card in slot 8 in a MAX 6000 and all
eight modems are idle, the terminal-server Show Modems command displays the following
output:
ascend% show modems
slot:item modem status
8:0 1 idle
8:1 2 idle
8:2 3 idle
8:3 4 idle
8:4 5 idle
8:5 6 idle
8:6 7 idle
8:7 8 idle
8:8 9 idle
8:9 10 idle
8:12 11 idle
8:13 12 idle
Parameters for configuring digital modems
The name(s) of the profile(s) that contain(s) the parameters for configuring your digital
modems depend(s) on which modem card(s) you have installed. The Main Edit Menu lists the
profile for the card you have installed.
If you have V.32bis (on a MAX 6000 only) modems installed in your unit, the Main Edit Menu
shows the profile as LAN Modem. If you have K56 modems installed, depending on the
number of modems installed per modem slot card, the Main Edit Menu shows the profile as
K56 Modem-8
, K56 Modem-12, or K56 Modem-16.