Lucent Technologies 6000 - Manual (Page 176)

4-44 MAX 6000/3000 Network Configuration Guide
Configuring Individual WAN Connections
Configuring PPP connections
VJ Comp=Yes
CBCP Enable=No
BACP=
Dyn Alg=
Sec History=
Add Pers=
Sub Pers=
Target Util
Ethernet
Connections
Connection profile
Encaps=PPP
Encaps Options
Send Auth=None
Send Name=N/A
Send PW=N/A
Recv PW=
MRU=1524
LQM=No
LQM Min=600
LQM Max=600
Link Comp=Stac
VJ Comp=Yes
CBCP Mode=N/A
CBCP Trunk Group=N/A
Split Code.User=N/A
Settings in a RADIUS profile
RADIUS uses the following attribute-value pairs for PPP connections:
Attribute Value
Password (2) Password expected from the caller for a dial-in connection.
Service-Type (6) Type of services the link can use. Set to Framed for dial-in PPP
connections that do not use a terminal-server login, or Login for
async PPP connections. If not specified, the service type is
unrestricted.
Framed-Protocol (7) Encapsulation protocol. Set to PPP (1) to enable a user to dial in
with PPP framing or dial in unframed and then change to PPP
framing.
Framed-MTU (12) Maximum number of bytes the MAX TNT can send in a single
packet (from 1 to 1524, default 1524).
Ascend-Link-Compressio
n (233) Link-compression method to use.