Lucent Technologies 6000 - Manual (Page 300)

6-14 MAX 6000/3000 Network Configuration Guide
Configuring X.25
Setting up X.25 PAD sessions
4 Open the Encaps Options subprofile and specify the name of the X.25 profile that carries
this connection.
5 Specify the password that authenticates the user connection.
6 Specify a default X.3 parameter profile for this connection.
7 Specify the X.121 address and password for automatic calling.
8 Exit the profile and, at the exit prompt, select the exit and accept option.
Example of X.25 PAD
Ethernet
Answer
Encaps...
X25/PAD=Yes
Ethernet
Connections
rchan
Name=rchan
Active=Yes
Encaps=X25/PAD
Encaps options...
X.25 Prof=ATT
Recv PW=localpw
X.3 Param Prof=CRT
Auto-Call X.121 Addr=031344159782111 *Dpassword
Setting up X.25 PAD sessions
This section describes some of the PAD commands and X.3 parameter profiles that can affect
how users’ terminal sessions operate.
X.3 parameters and profiles
By setting one or more X.3 parameters or by applying an X.3 profile, the user’s terminal or
host DTE can modify PAD operations. This section lists the X.3 parameters and profiles and
then describes how to set them from the PAD. Table 6-2 lists the X.3 parameters, numbered
1–22.
Table 6-2. X.3 parameters
Parameter Description Possible values
1 PAD recall 0—Escape not allowed
1—Escape allowed (the default)
2 Echo 0—No echo
1—Echo (the default)