Configuring x.25 pad users from radius, Configuring x.25 pad users from radius -24 – Lucent Technologies 6000 User Manual
Page 310
6-24
MAX 6000/3000 Network Configuration Guide
Configuring X.25
Configuring X.25 PAD users from RADIUS
Configuring X.25 PAD users from RADIUS
Using DNIS/CLID, you can now authenticate X.25 PAD users by means of RADIUS. This
feature is useful when you require more than 3 X.25 connection profiles. A RADIUS user can
set the attribute Ascend-X25-Pad-X3-Profile to Custom and use the
Ascend-X25-Pad-Parameters attribute to configure the PAD X.3 parameters on a per-user
basis. However, when the PAD users are configured from RADIUS, the ability to store a
30
48
Timer expired
31
49
For incoming call (or for DTE timer expired for call
request)
32
50
For clear indication (or for DTE timer expired or
retransmission count surpassed for clear request)
33
51
For reset indication (or for DTE timer expired or
retransmission count surpassed for reset request)
34
52
For restart indication (or for DTE timer expired or
retransmission count surpassed for restart request)
40
64
Call setup, call clearing, or registration problem
41
65
Facility/registration code not allowed
42
66
Facility parameter not allowed
43
67
Invalid called address
44
68
Invalid calling address
45
69
Invalid facility/registration length
46
70
Incoming call barred
47
71
No logical channel available
48
72
Call collision
49
73
Duplicate facility requested
4A
74
Nonzero address length
4B
75
Nonzero facility length
4C
76
Facility not provided when expected
Table 6-6. X.25 diagnostic field values (continued)
Hex
value
Dec
value
Diagnostic