Lucent Technologies 6000 - Manual (Page 338)

7-4 MAX 6000/3000 Network Configuration Guide
Configuring IP Fax
Configuring system parameters for IP fax modem usage
Ch 1 Trnk Grp=5
Ch 2 Trnk Grp=5
Ch 3 Trnk Grp=5
Ch 4 Trnk Grp=5
Ch 5 Trnk Grp=5
Ch 6 Trnk Grp=5
Ch 7 Trnk Grp=5
Ch 8 Trnk Grp=5
Ch 9 Trnk Grp=5
Ch 10 Trnk Grp=5
Ch 11 Trnk Grp=5
Ch 12 Trnk Grp=5
Ch 13 Trnk Grp=5
Ch 14 Trnk Grp=5
Ch 15 Trnk Grp=5
Ch 16 Trnk Grp=5
Ch 17 Trnk Grp=5
Ch 18 Trnk Grp=5
Ch 19 Trnk Grp=5
Ch 20 Trnk Grp=5
Ch 21 Trnk Grp=5
Ch 22 Trnk Grp=5
Ch 23 Trnk Grp=5
Ch 24 Trnk Grp=5
Configuring a typical Call Route profile
After assigning the trunk group, you must create a Call Route profile to direct outbound calls
to the newly configured line. For example:
admin> new call-route { { { shelf-1 slot-5 7 } 0 } 0 }
CALL-ROUTE/{ { { shelf-1 slot-5 7 } 0 } 0 } read
admin> set trunk-group = 5
admin> set call-route-type = trunk-call
admin> write
CALL-ROUTE/{ { { shelf-1 slot-5 7 } 0 } 0 } written
Specifying the maximum number of parallel dial-outs
The Parallel Dial parameter limits the number of dial-out calls that the system can place at one
time. If the maximum number of dial-out calls is being processed and a dial-out request is
made, the system queues the request and processes it at the earliest possible opportunity.