Tally Genicom T5023+ - Manual (Page 104)

Print quality and character size Standard commands
94 T5023/5023+ - Programming Guide
Switching print quality (Draft/ LQ)
Function:
– Switching to draft print quality
ESC x (0) switches from LQ to draft print quality. This results in a higher print
rate and a lower print density (60 print dots per inch in a horizontal direction).
– Switching to LQ print quality
ESC x (1) switches from draft to LQ print quality. This results in a lower print
rate and a higher print density (180 print dots per inch in a horizontal direc-
tion).
ESC
27
1B
x
120
78
(n)
n
n
ASCII character
Decimal
Hexadecimal
– Switching from draft to LQ is also possible within a print line.
– After switching to LQ print quality, printing takes place in the last
print type selected using ESC k (n).
– After switching on or initializing (ESC @) the printer prints in the
print quality which has been set in the emulation menu.
– When switching on the proportional spacing, the print quality is au-
tomatically set to LQ.
i