Tally Genicom T5023+ - Manual (Page 181)

Graphics commands Syntax of the graphics commands
T5023/5023+ - Programming Guide 171
Switching on the ’quadruple density’ graphics mode
Function:
The 8- dot graphics mode ’quadruple density’ is switched on with ESC Z (n) (m).
The parameters n and m determine the number of dot columns to be printed:
Number of dot columns = m * 256 + n
One data byte must be specified per dot column.
ESC
27
1B
Z
90
5A
(n)
n
n
(m)
m
m
Data...
Data...
Data... ASCII character
Decimal
Hexadecimal
– The section “Mode of operation of the graphics commands” con-
tains further notes on the command ESC Z (n) (m).
– Using ESC ?, any graphics mode of the document printer can be
assigned to the command ESC Z.
i