Tally Genicom T5023+ - Manual (Page 128)

Print modes Standard commands
118 T5023/5023+ - Programming Guide
– Combination of several print modes or character sizes
In order to combine several print modes or character sizes the values
given in the list (above) must be added together.
Calculation examples:
Proportional spacing, bold print, underlining:
n = 2 + 8 + 128 = 138
12 cpi, condensed print, double impact print:
n = 1 + 4 + 16 = 21
– ESC ! (0) switches off all print mode combinations and sets the cha-
racter size to 10 cpi.
– ESC ! (n) can be used in combination with the commands for swit-
ching the individual print modes or character sizes on and off.
– When switching on proportional spacing the character size is set to
10 cpi (Pica) and LQ print quality is switched on.
i