Tally Genicom T5023+ - Manual (Page 83)

Standard commands Vertical print control
T5023/5023+ - Programming Guide 73
Selecting a vertical tab channel
Function:
Via ESC / (c) a vertical tab channel c can be selected. The values 0 to 7 (= chan-
nel 0 to channel 7) are permitted for c.
For all subsequently entered VT commands (Vertical tabulation) the paper feed
will then be controlled by the valid tabs in the current channel.
Vertical tabulation
Function:
After VT all the data contained in the buffer is printed and the paper transported to
the next tab in the current channel.
ESC
27
1B
/
47
2F
(c)
c
c
ASCII character
Decimal
Hexadecimal
VT
11
0B
ASCII character
Decimal
Hexadecimal
– A channel can be selected via ESC / (channel number).
– If no channel has been selected, the vertical tabs are accepted in
channel 0.
– If no vertical tabs are set in the standard channel 0 nor in a selected
channel 1 to 7, the paper is only transported one line on after VT
(Line feed).
i