Tally Genicom T5023+ - Manual (Page 290)

ESCAPE Sequences (Bootstrap Loader) Loadable Firmware/Character Ge-
280 T5023/5023+ - Programming Guide
Exiting the Load Function
Function:
This command is used to exit the bootstrap loader, to test the electronics, and to
start the loaded firmware.
Note:
The bootstrap loader is not exited unless a valid firmware and one of the
character generators has been loaded.
The firmware returns to the operation with the interface parameters which can
be set via the operating panel.
ESC
27
1B
BEL
7
07
E
69
45
ASCII characters
Decimal
Hexadecimal