Tally Genicom T5023+ - Manual (Page 371)

Appendix Error messages
T5023/5023+ - Programming Guide 361
Malfunctions
Some error messages contain numerical codes with additional
information to the cause of error. This additional information is only for the
service personnel and can be called up by pressing the VALID key . The
service information will disappear after some time.
Error Cause / Possible action Service information:
No./Meaning
PAPER
LENGTH Document too short
Use a longer document
PAPER
JAM Paper jam, paper blocked, paper can
not be ejected
Check paper transport paths, remove
remainder of paper
00...10
PAPER
WIDENESS Print job extends over right-hand pa-
per edge
Feed in larger paper
PARITY
ERROR Serial interface Parity Error
Check settings of printer or system
OVERRUN
ERROR Serial interface Parity Error
Check settings of printer or system
FRAMING
ERROR Serial interface, serial interface Over-
run Error
Check handshake protocol printer or
system, check cable
BREAK Serial interface, Switching system
ON/OFF, push/pull interface cable,
produced by the system driver
i