Tally Genicom T5023+ - Manual (Page 95)

Standard commands Horizontal print control
T5023/5023+ - Programming Guide 85
Horizontal tabulation
Function:
Using HT the print head is set to the next tab position.
After positioning on the last (right) tab position the HT command has no effect. This
also applies if all the tab positions were deleted using ESC D NUL.
HT
9
09
ASCII character
Decimal
Hexadecimal
– After switching on the printer or after initializing (ESC @) the tabs
are set at a spacing of eight 10-cpi characters.
– The tab positions are set using the command ESC D and deleted
using ESC D NUL.
– With centered and flush right text adjustment or with margin justifi-
cation (ESC a (n)) the HT command is ignored.
– Various programs and computers convert the HT command into
corresponding blank spaces instead of passing the command di-
rectly to the document printer.
i