Tally Genicom T5023+ - Manual (Page 65)

Standard commands Line feed commands
T5023/5023+ - Programming Guide 55
Line feed commands
The standard line spacing amounts to six lines per inch, i. e. the line spacing is
1/ 6 inch.
The line spacing can be changed using the following commands, whereby the smal-
lest unit for the line spacing is 1/ 180 inch. The corresponding line feed is carried out
depending on the set line spacing:
Command Function
LF Line feed J
ESC J (n) Carrying out an n/180 inch line feed J
ESC 0 Determining 1/8 inch line spacing J
ESC 2 Determining 1/6 inch line spacing J
ESC 3 (n) Determining 1/180 inch line spacing J
ESC A (n) Determining 1/60 inch line spacing
J
ESC + (n) Determining 1/360 inch line spacing