Tally Genicom T5023+ - Manual (Page 84)

Vertical print control Standard commands
74 T5023/5023+ - Programming Guide
Paper control
Parameter:
n=0 Deactivates the mode
n=1 Selects the feeder compartment 1
n=2 Selects the feeder compartment 1
n=4 Selects the feeder compartment 1
n=R Ejection
ESC
27
1B
EM
25
19
n
n
n ASCII character
Decimal
Hexadecimal
This command is only to be used if a single sheet feeder is installed. If
the feeder is activated and no document has be fed by the operator, a
document will be fed from the paper supply automatically when a print
or line feed command is received.
i